ML 430 (163.172) V8-4.3L (113.942) (2000)
Headlamp Alignment Control Module: Service and Repair
Remove/Install Headlight Beam Adjustment Control Module
- with CODE (612b) Xenon headlamp unit
Remove/Install
1
Remove cover below instrument panel (left)
2
Disconnect connector from headlamp range adjustment control module (N71)
3
Unscrew headlamp range adjustment control module from mount of extended activity module (EAM)
NOTE: 2 nuts.
4
Remove headlamp range adjustment control module (N71)
5
Install in the reverse order
6
Adjust headlamp into zero position using STAR DIAGNOSIS
7
Inspect headlamp adjustment, correct if necessary.