ML 430 (163.172) V8-4.3L (113.942) (2000)
Wheel Speed Sensor: Service and Repair
AR42.30-P-0712GH Remove/Install Left or Right Front RPM Sensor
Remove/Install Left Or Right Front rpm Sensor
Work instructions
6a
Rpm sensor bolts
NOTE: Installation: Install new bolts.
L6/1, L6/2
Left front rpm sensor and right front rpm sensor
NOTE:
-
Installation: Check rotor on wheel hub for damage. Pay attention to cleanliness of magnetic tip. Fasten cables for rpm sensor on
upper transverse control arm with cable straps (arrows) so that the cables are not damaged when the suspension is fully compressed
and rebounded.
-
Lightly grease bore for rpm sensor in wheel carrier with MB long-term grease: I MB long-term grease.
L6/1x1,L6/2x1 Rpm sensor connector
NOTE: Installation: Pay attention to correct routing.