ML 430 (163.172) V8-4.3L (113.942) (2000)
NOTE: Installation: ensure that lines are routed properly.
6
Unplug connector (5) and remove connector at A-pillar
NOTE: Slacken retaining lug on back of connector and push connector towards door.
7
Unplug connector (6).
8
Unscrew nut from ground (right A-pillar) (W29/2) and detach circuit 31 cable (3) from ground.
9
Unscrew plastic nuts (7).
10
Remove fuse and relay module in right front footwell (F2) with wiring harness.
11
Install in the reverse order