ML 430 (163.172) V8-4.3L (113.942) (2000)
Rear Door Window Motor: Service and Repair
Removing And Installing Power Window Motor In Rear Door
Removal, installation
1
Remove power window lift mechanism in rear door
2
Unscrew screw (1)
CAUTION: Protect motor from falling down
-
See Special Tools below.
-
Screw for power window motor in rear door = 5 Nm
3
Remove power window motor (M10/5 or M10/6) on window lift mechanism (2)
NOTE: Installation: Grease gear on motor lightly
4
Install in opposite order
Special Tools
Torx Bit Set P/N 3 000 589 01 10 00