ML 500 (163.175) V8-5.0L (113.965) (2003)
Sunroof / Moonroof Weatherstrip: Service and Repair
AR77.20-P-1150GH Remove/Install Tilting/Sliding Roof Rubber Bellows
Remove/Install Tilting/Sliding Roof Rubber Bellows
- with CODE (414a) Glass electric tilting/sliding roof
Remove/Install
1
Slide tilting/sliding roof paneling toward rear
2
Position tilting/sliding roof to upper-most pop-up position
3
Pull retaining lip (2) of rubber bellows (1) out of groove of tilting/sliding roof bottom side
NOTE: Start at rear of rubber bellows.
4
Unclip clip (3) for front rubber bellows at tilting bracket
5
Turn rubber bellows with plastic rail toward center of vehicle until clip (4) at rear pops out of tilting/sliding roof frame
6
Remove rubber bellows (1)
7
Install in the reverse order