ML 500 (163.175) V8-5.0L (113.965) (2003)
/v8-5.0l_(113.965)/Page-2178002.png)
NOTE: Installation: Observe markings when screwing on brake lines. Do not mix up brake lines.
5
Unclip pressure circuit brake line (DK) and secondary brake circuit brake line (SK) from longitudinal frame member at inside
CAUTION: Risk of damaging clips (2).
6
Remove pressure circuit brake line (DK) and secondary brake circuit brake line (SK)
CAUTION: Risk of confusion! Label brake lines.
7
Install in the reverse order
