ML 500 (163.175) V8-5.0L (113.965) (2003)
/v8-5.0l_(113.965)/Page-785003.png)
Component Identification
Application of sealant to end cover
The lines drawn G, E and the arrow D mark the application of sealant.
Clean sealing surfaces, apply sealant only to the specified surfaces with a bead of 2.0 mm ± 0.5 mm.
The sealant must be applied within 10 minutes!
The silicone bead must not be spread. Only the approved silicone sealant may be used may be used.
