mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Daytime Running Lamp|Diagrams > < Diagram Information and Instructions|Page 13220
Page 1
background image

Daytime Running Lamp: Technical Service Bulletins
Lighting - Enabling Daytime Running Lamps

Date: August 4, 2003

Order No.: T-B-82.10/187a

Supersedes: T-B-82.10/187 dated February 7, 2002

Group: 82

Revision: Addition of MY 2003

SUBJECT:
Model 163.154/157/174/175 

Model Year 2002 and 2003

Enabling Daytime Running Lamps

Beginning with SDS issue 01.2002, it is possible to activate Daytime Running Lamps (DRL) on Model Year 2002 and 2003 vehicles.

This can be done by the following the procedure using the Star Diagnosis System (SDS).

Select the correct model select Control units select Body select AAM - All Activity Module select Control unit adaptations select Read coding and
change if necessary select National version this will probably be set for USA change this to Canada hit F3 to change coding end DAS

When the exterior lamp switch is in the 0 (off) position, only the low beams will be on when the engine is running and it is light outside. When the
ambient light sensor senses dusk, the parking lamps will also be switched on. This may also occur if there is frost on the windshield. In this position, it is
not possible to use the high beams by pressing the exterior lamp switch forward. The high beam flasher does function. Neither the front nor rear fog
lamps can be used.

When the exterior lamp switch is in the AUTO position, the lamps will turn on as described above with one exception. It is possible to use the high
beams by pressing the eAerior lamp switch forward.

The exterior lamp switch must be in the headlamp on position to turn on the fog lamps.

Daytime Running Lamp|Diagrams > < Diagram Information and Instructions|Page 13220