ML 500 (163.175) V8-5.0L (113.965) (2003)
Wiper Arm: Service and Repair
AR82.30-P-6910GH Remove/Install Tailgate Wiper Arm
Removing And Installing Tailgate Wiper Arm
Removal, installation
Danger:
-
Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.
-
Always remove ignition key before working on windshield wiper mechanism.
1
Open cover (1)
NOTE:
-
Wiper motor must be in park position, if necessary
-
move wiper motor to park position
2
Unscrew nut on wiper arm (2)
CAUTION: do not damage washer nozzle
-
Nut for rear window wiper arm = 15 Nm
3
Remove wiper arm (3)
NOTE: Pivot wiper arm back and remove, if necessary
-
See Special Tools below.
4
Reinstall in opposite order
NOTE: When installing: Attach wiper arms so that wiper arm points toward left (driver's side)
Special Tools