ML 550 (164.172) V8-5.5L (273.963) (2009)
^
Entry of POIs via map display
^
Route information and options
^
Display compass, with code (245) Electronic compass
Selection or settings via function bar
-
"Disp"
-
Display-specific settings (aspect, map style, VICS, direction, display POI, POI list)
-
"Route"
-
Way point, detour, recalculate, alternative route, all route map, route information (arrival time, distance, show route on map (route browser),
inhibit route) appears only when already entered for a destination.
-
"Save"
-
Enter destination and store in address book
-
"Dest"
-
Submenu in which destination options can be stored (destination entry, dest. info, stopover, quit)
-
"Rpt."
-
Repeat acoustic route recommendation
Selection or settings can be made using the control buttons on the COMAND operating, display and controller unit or the VCS [SBS].
Destination entry
Destination entry is possible in the "Dest." menu item The default screen appears.
Selections or settings:
-
"Set Destination"
-
Entry of a destination address
-
"Memory Point"
-
Call up a destination address from the "Destinations" memory
-
POI Facility
-
Call up a point of interest (POI) from the list of special destinations
-
"VICS information"
-
Traffic jam information
-
"ETC history"
-
Toll information
-
"Settings"
-
Navigation settings
-
"Avoid Area"
-
Blocking or avoidance of areas for route planning
Selection or settings can be made using the control buttons on the COMAND operating, display and controller unit or the VCS [SBS].
Entry of POIs via map display
Entry of points of interest on map display (2D or 3D) is possible with the Disp. menu item Selection or settings can be made with the control buttons on
the COMAND operating, display and controller unit.
Route information and options
Display of route information and options (arrival time, distance, view route on map (route browser), inhibit route) is possible with the "Route" menu
item. The default screen appears.
Selections or settings:
-
"Route information"
-
Information such as distance and required time to destination or interim stop
-
"Route browser"
-
In the route browser, the calculated route can be scrolled through using the "Next" and "Previous" menu items.