ML 550 (164.172) V8-5.5L (273.963) (2009)
/v8-5.5l_(273.963)/Page-2739003.png)
1. Glue on rubber window spacers (area F).
Do not remove protective foil.
AR65.10-P-9080-04GZ Prepare Antenna Module Cover For Installation
AR65.10-P-9080-04GZ Prepare Antenna Module Cover For Installation
Workshop Equipment
Repair Materials
Wear cotton gloves. Ensure that there are no fingerprints on the bonding surface (E). To prevent adhesion problems when installing the window, keep the
bonding surface (E) free of dust, oil, grease, wax, dirt residues and other adhesive substances.
1. Check antenna module cover (1) for damage.
2. Attach cup suction tool to outside of antenna module cover (1) and place antenna module cover (1) (with inside facing upwards) on a suitable
support.
3. Apply glass activator to bonding surface (E) of antenna module cover (1) using part of paper towel and wipe with remaining part of paper towel.
