ML 550 (164.172) V8-5.5L (273.963) (2009)
17. Screw on crossmember on right rear center section finger tight, to torque value, using microencapsulated bolts M10 x 30 (9) with shims 10.5 x 20
x 2 and nuts M10.
18. Screw on right longitudinal member reinforcement (6) to torque value using two self-locking bolts M10 x 40 (12) with shims 10.5 x 25 x 2 (13)
onto the vehicle longitudinal member.
If necessary, place wiring harness (22) to one side.
19. Screw on left longitudinal member reinforcement (5) to torque value using two self-locking bolts M10 x 40 (12) with shims 10.5 x 25 x 2 (13)
onto the vehicle longitudinal member.