mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF72.29-P-4141GZ Left Front Door Control Unit, Component Description|Page 15515 > < Wiring Diagram for Left Front Door Control Unit (DCU) PE72.29-P-2101MAA|Page 15512
Page 1
background image

Door Module: Description and Operation
GF72.29-P-4141GZ Left Front Door Control Unit, Component Description

GF72.29-P-4141GZ Left Front Door Control Unit, Component Description

Location

The left front door control unit is located in the upper area of the left door inside.

Task

The left front door control unit is connected with the controller area network bus, class B (interior compartment) (CAN B) to exchange data and has the
following purposes:

Reading in switches:

-

Driver power window and outside mirror adjustment switch group (S20/1)
-

Rear side windows child safety lock switch (S20/1s5)

-

Outside mirror fold-in/out switch S20/1s9

-

Outside mirror adjustment rocker switchS20/1s12

-

Open vent window switch (S20/1s15)

-

Close vent window switch (S20/1s16)

-

Outside mirror adjustment switchS50

-

Open and close switch for rear-end door, driver (S15/3)

-

Left interior CL [ZV] switchS85/5

Reading in sensors:

-

Left front IR receiver (A26/1)

-

Left front power window motor Hall sensor (M10/3)

-

Mirror up/down adjustment potentiometer (M21/1r2)

-

Mirror in/out adjustment potentiometer (M21/1r3)

Switching loads via internal semi-conductor switches:

-

Left outside mirror turn signal lamp (E6/5)

-

Left front door entrance/exit lamp (E17/3)

-

Left front door inside handle illumination (E17/11)

-

Left front power window motor (M10/3)

-

Left front door CL [ZV] motor (M14/6)

-

Left electrically adjustable and heated outside mirror (M21/1)

-

Left outside mirror ambient lamp (M21/1e1)

-

Automatic mirror dimming (M21/1h1)

-

Mirror fold-in motor (M21/1m3)

-

Mirror heater (M21/1r1)

-

Illumination of driver power window and outside mirror adjustment switch group

The left front door control unit is connected with the CAN interior bus to exchange data.

The driver power window and outside mirror adjustment switch group is read in by the left front door control unit via a LIN BUS

Task in combination with air conditioning

The left front door control unit senses the window position in the left front door of the vehicle and stores this information on the CAN B. The AAC
control and operating unit (N22) or the comfort AAC control and operating unit (N22/7) reads in the signals for the "Driver door ON" window position,

GF72.29-P-4141GZ Left Front Door Control Unit, Component Description|Page 15515 > < Wiring Diagram for Left Front Door Control Unit (DCU) PE72.29-P-2101MAA|Page 15512