ML 550 (164.172) V8-5.5L (273.963) (2009)
/v8-5.5l_(273.963)/Page-1638002.png)
Replace hose clamps.
Component Identification
5
Press large hose clamp (shown with tensioning lug) (5, 9) and small hose clamp (7, 11) together using commercially-available pincers.
6
Check that the hose clamps are properly seated.
The connection of the hose clamp on the inner joint must be at 180 degrees to the connection of the hose clamp on the outer joint so that no
imbalance is produced.
