ML 55 AMG (163.174) V8-5.5L (113.981) (2001)
NOTE:
-
Only Engine 112.942 /970 and 113.942.
-
For this step unscrew bolts at the bottom of fan shroud.
-
Installation: When installing a new radiator with integrated oil cooler for the power steering pump, a new fan shroud is necessary, if a
radiator without integrated oil cooler was installed beforehand.
6
Remove lamp unit (7)
7
Remove front end crossmember (8)
8
Take off coolant lines (4, 6) and coolant line expansion reservoir (5) at radiator.
9
Remove rubber seal (9) of radiator
10
Remove oil line (return line of radiator -> expansion tank of power steering pump) (18) and oil line (feed line of steering gear -> radiator) (19)
NOTE: Only as of 5/98, close connections!
11
Unbolt ATF lines (10) at radiator
NOTE: Seal connections!
12
Separate connector from fan and remove air intake grill (11).
NOTE: Only Engine 112.942/970 and 113.942.
13
Unbolt condenser at radiator
NOTE: Do not disconnect lines.
14
Remove attachment parts (20) and rubber shock absorber (21)
NOTE: The rubber shock absorber (21) is designed to prevent vibrations which may occur between condenser and radiator (15) when driving
off-road.
15
Take off fluid reservoir of AC (14) at radiator
NOTE: Place to the side with lines connected. Detach condenser at radiator.
16
Remove radiator (15)
NOTE: Installation:
-
When Installing, the mounting studs of the radiator must be inserted into the rubber grommets of the bottom cross member.
-
On Model 163.154 with Engine 112.942 prior to vehicle identification number 043553, additional operations must be carried out, if not
already done so, when installing a new radiator with integrated oil cooler for power steering pump.
17
Detach air ductings (12)
NOTE: Replace clamps of air ductings (13).
18
Install in the reverse order.
19
Pour in coolant
20
Check headlamp adjustment, correct if necessary
DANGER:
-
Risk of accident from vehicle starting off by itself when engine running. Risk of injury as working around the engine during start-up
or while running may result in contusions and burns
-
Secure vehicle to prevent it from moving off by itself.
-
Wear closed and close-fitting work clothes.
-
Do not grasp hot or rotating parts.
21
Check oil level in automatic transmission, correct if necessary.
22
Inspect cooling system for leaks.