ML 55 AMG (163.174) V8-5.5L (113.981) (2001)
/v8-5.5l_(113.981)/Page-873003.png)
1. The piston diameter on engines 112, 113 is stated in two tolerances. The two tolerances of the piston diameters are distinguished one from the
other by the letters "x" ans " - "
The marking is located on the top of the piston crown.
Shown on engine 112
2. The cylinder bore diameter on engines 112, 113 is stated in two tolerances. The two tolerances of the cylinder bore diameters are distinguished one
from the other by the letters "x" and " - ". m The marking is located at the bottom right on the crankcase at the mount for the engine support.
Shown on engine 112
AR03.10-P-7021AV Remove/Install Pistons
Piston removal and installation
Shown On Engine 112
Remove
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
