mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Maintenance Indicator|Page 13002 > < Maintenance Indicator|Page 13000
Page 12
background image

automatically, after 5 s start switch in position 2 or driving, if the remaining time is exceeded:
The service symbol and the readout "DAYS ... EXCEEDED" 

appears for 30 s (for 10 s up to mid-July 97). (On vehicles not fitted with multifunction display, the service and the dock symbol appear. The "remaining
time" is displayed with a negative sign (minus sign). The readout flashes in this case.)

After the display reaches the maximum readout of -730 days, the readout remains at this figure. The readout is displayed with a resolution of I day.

As of approx. 06.97 a brief warning signal sounds in addition.

at driver request The readout is then displayed, as above, for 10 s.

NOTE:  If a speed limit is set at the cruise control, this speed limit is displayed for a short moment before the ASSYST display.

If certain measured values are not supplied to the ASSYST, e.g. because of failure of a sensor, it switches to stored substitute values. An appropriate
entry is then made in the fault memory of the particular control module.

If the power supply fails, the data are retained. The times without operating voltage (battery disconnected) are not recorded, however
They can be retroactively included, however, with the HHT.

Maintenance Indicator|Page 13002 > < Maintenance Indicator|Page 13000