mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.10-P-0001GH Headlamp Range Adjustment (HRA), Function|Page 13659 > < GF82.10-P-0001GH Headlamp Range Adjustment (HRA), Function
Page 1
background image

Headlamp Alignment Control Module: Description and Operation
GF82.10-P-0001GHA Headlamp Range Adjustment (HRA), Function

GF82.10-P-0001GHA Headlamp Range Adjustment (HRA), Function

-

with CODE (614) Bi-xenon headlamp unit

Function

The electrical headlamp range adjustment operates dynamically. Every change in the vehicle level is determined and signaled to the headlamp range
adjustment control module (N71) by the rear axle sensor and the front axle sensor (A51, A52). The control module (N71) compares the vehicle level and
the headlamp position. If necessary, the headlamp setting is corrected by the control module (N71) via the headlamp range adjustment motors (E1m1,
E2m2). The headlamp position is only corrected if a modified vehicle level is signaled to the control module (N71) by the front and rear axle sensors
(A51, A52) for a specific time span.

Headlamp range adjustment control module (N71)

The headlamp range adjustment control module (N71) processes the signals from the front and rear axle sensors (A51, A52) as well as the position of the
headlamp range adjustment motors (E1m1, E2m1). After evaluating these signals, commands are sent to the headlamp range adjustment motors (E1m1,
E2m1).

Front and rear axle sensors (A51, A52)

A sensor is fitted to the front axle and to the rear axle and the sensors pick up the instantaneous vehicle level at the control arm. These sensors (A51,
A52) transmit the determined vehicle level to the control module (N71).

Headlamp range adjustment motor (E1m1, E2m1)

The position of the reflectors is signaled to the headlamp range adjustment control module (N71) by a potentiometer in the headlamp range adjustment
motor. The motors (E1m1, E2m1) receive a command from the control module (N71) for correcting the headlamp position. If the low beam is switched
on and the key is in position 2, the motors are referenced. The reflectors are moved to the lowest position and then, depending on the vehicle level,
moved to the correct position.

GF82.10-P-0001GH Headlamp Range Adjustment (HRA), Function|Page 13659 > < GF82.10-P-0001GH Headlamp Range Adjustment (HRA), Function