ML 55 AMG (163.174) V8-5.5L (113.981) (2001)
Throttle Cable/Linkage: Adjustments
Adjust Throttle Control
Inspection
1
Check ease of movement and condition of relay lever position sensor (31/1) and control cable (32)
NOTE: Replace parts if necessary.
Setting
2
Depress accelerator (24) until it rests against the kickdown switch (S16/6)
NOTE:
-
Full throttle position.
-
Do not operate kickdown switch (S16/6)!
3
Twist adjusting screw (32/3) until relay lever position sensor (31/1) rests against full throttle stop (b)
NOTE: Do not overstretch control cable (32).
4
The relay lever position sensor (311) must rest against the closed throttle stop (a) when the accelerator pedal is relieved
NOTE: Closed throttle position.
5
Twist adjusting nut (32/2) until relay lever position sensor (31/1) rests against closed throttle stop (a) or until there is no more accelerator pedal
free travel.
Inspection
6
Check full throttle and closed throttle positions