mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Power Steering - Fluid Leaks|Page 8939 > < Steering - Fluid Leaks/Noises/Heavy Steering/Looseness|Page 8934
Page 1
background image

Power Steering Line/Hose: Customer Interest
Power Steering - Fluid Leaks

Date: June 12, 2002

Order No.: T-B-46.30/09a

Supersedes: T-B-46.30/09 dated May 16, 2002

Group: 46

Revision: Part No. Included

SUBJECT:
All Model 163, Up to VIN A357702 Power Steering Leaks

If you encounter instances in Model 163 vehicles mentioned above of power steering leaks from the connection to the power steering cooler, a possible
cause of this leak may be the clamp used to secure the power steering hose to the cooler not providing sufficient clamping force. Please perform the
following:

1.

Turn off engine and remove ignition key.

2.

Open hood.

3.

Loosen existing clamp (1, Figure 1) and open sufficiently to remove from around hose (2, Figure 1). Clamp (1, Figure 1) may be discarded.

4.

Open replacement clamp (3, Figure 1) to fit over hose (2, Figure 1)

5.

Place replacement clamp in proper position around hose (2, Figure 1) and tighten sufficiently to secure hose.

6.

Check power steering fluid level, correct if necessary. Please refer to document AP46.00-P-4611BB

7.

Start vehicle and check for leakage.

8.

Close hood.

Parts Information

Power Steering - Fluid Leaks|Page 8939 > < Steering - Fluid Leaks/Noises/Heavy Steering/Looseness|Page 8934