ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
Component Identification
Component Identification
Wiring harness routing for illuminated door sill moldings
Start routing the illuminated door sill moldings wiring harness (2) in the area of the right rear bench seat (ground (right rear seat)).
1
Route illuminated door sill moldings wiring harness (2) in the vehicle as per the routing diagram.
2
Route the illuminated door sill moldings wiring harness (2) over the right wheelhouse toward the rear into the load compartment and fasten to
on-board wiring harness using cable ties.