ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
/v8-6.3l_(156.980)/Page-1030002.png)
^
From underneath vehicle, detach left engine oil line (A, Figure 2) from line to engine (B).
^
Remove rubber star mount (arrow, Figure 3) from left engine oil line and remove line (A) towards rear.
^
Cut a 115 mm piece of edge guard (A, Figure 4) and install on slanted edge of vehicle frame bracket (B).
4.
Install new left engine oil line and reassemble in reverse order.
^
Torque both engine oil line bolts to 6 Nm.
^
Ensure new rubber star mount on new line is installed in correct location (same as on old line, as shown in Figure 1).
^
Reinstall front bumper, again referring to WIS document AR88.20-P-2000GZ.
