ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
The line (1) identifies the sealant run
The sealing surface must be cleaned. The sealing compound must only be applied to the specified surface in the form of a bead and a height and width
of 2.0 mm (± 0.5 mm).
The sealing compound must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealing compound may be used.
Application of sealant to oil pan bottom section on an engine with a front sump
Application off sealant to oil pan bottom section on an engine with a front sump
The line (1) identifies the sealant run
The sealing surface must be cleaned. The sealing compound must only be applied to the specified surface in the form of a bead and a height and width
of 2.0 mm (± 0.5 mm).
The sealing compound must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealing compound may be used.