mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

T-14_30-24 > < A/T - 722.9, Delayed Reverse Engagement|Page 8347
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Drivetrain Clunk On Throttle Let Off

Date: November 14, 2008

Order No.: T-B-27.00/111

Supersedes:

Group: 27

SUBJECT:

Model 164.122/175/177/186/822/871/886

Throttle Lift-Off Clunking Noise In Vehicle Speed Range Up To Approx. 50 MPH

If you receive customer reports in the above model vehicles of a throttle lift-off clunking noise in the vehicle speed range up to approx. 50 MPH, it may
be due to load change damping of the drive train which is not ideal and may also have effects on the quality of downshifts 4-3, 3-2 and 2-1 in the 722.9
automatic transmission.

To verify the complaint, road-test the vehicle by manually restricting the shifting range with the engine at moderate speeds, briefly depress the 
accelerator pedal momentarily up to 50% of overall travel while listening for any knocking noises in the drive-train. If the condition is found to exist,
resolve by programming the engine control module with Star Diagnosis 10/08 or later and perform SCN coding.

NOTE:  The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated
on November 14, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.

In Case of Warranty

Operation: Short test perform (54-1011)

Control unit - software (after short test), install (54-0991)

Control unit - code (after short test), perform (54-0992)

Road test, perform (000-9151)

T-14_30-24 > < A/T - 722.9, Delayed Reverse Engagement|Page 8347