ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
/v8-6.3l_(156.980)/Page-11004.png)
Apply the glass activator to the black bonding surface (E) only. If glass activator gets onto transparent areas wipe off immediately. Allow glass
activator to dry completely.
4. Apply glass primer to bonding surface (E) of antenna module cover (1) using application rod provided and allow to dry completely (flash-off time
at least 10 min).
AR65.10-P-9080-05GZ Apply Adhesive Material To Antenna Module Cover
AR65.10-P-9080-05GZ Apply Adhesive Material To Antenna Module Cover
Commercially Available Tools
Repair Materials
Wear cotton gloves. Ensure that there are no fingerprints on the bonding surface (area E).
1. Cut triangular opening in application nozzle so that adhesive can be applied with a height of approx 14 mm and a width of approx. 8 mm.
2. Guide application nozzle along bonding surface (area E) on body flange, squeezing out adhesive evenly.
Remove contamination caused by the adhesive immediately. Completely squeeze out excess adhesive from cartridges immediately after applying
adhesive and dispose of adhesive as per local regulations.
AR65.10-P-9080-06GZ Install Antenna Module Cover
AR65.10-P-9080-06GZ Install Antenna Module Cover
