ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
AR46.40-P-0400-01GH Detaching and Attaching Inner Clamp
AR46.40-P-0400-01GH Detaching and attaching inner clamp
Component Identification
Remove
1
Remove inner clamping collar (11a) with side-cutting pliers.
Install
2
Fit new inner hose clamp (11a) and tension with commercially available clamp pliers.
3
Check that inner hose clamp (11a) is seated correctly.
AR46.40-P-0400-02CW Push the Boot Onto the Steering Gear Housing and Position
AR46.40-P-0400-02CW Push the boot onto the steering gear housing and position
Component Identification
1
Push boot (1) onto steering gear housing (2).
Models 204, 207, 212: Slide on so far until the recesses (1a) appear at the housing (2) of the steering gear.
2
Position boot (1):
Models 204, 207 with diaphragm valve (1b):
As shown in the picture the diaphragm valve (1b) must be located in the center of the marking (2m).
Model 164, 171, 203, 209, 251:
The diaphragm valve (1b) must point in the direction of travel. Model 211, 219:
The diaphragm valve (1b) must point opposite to the direction of travel.