ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
-
Specified position of range selector lever
The following information is passed to other systems: Instrument cluster
-
Gear selector switch position, at "Circuit 15 OFF" the intelligent servo module for DIRECT SELECT forwards the gear selector switch position
signals sent from the steering column module to the multifunction display (A1p13)
-
Gear selector switch position, at "Circuit 15 ON" the intelligent servo module for DIRECT SELECT forwards the gear selector switch position
signals sent from the fully integrated transmission control (VGS) control unit to the multifunction display
Fully integrated transmission control (VGS) control unit
-
At "Circuit 15 ON" actual position of range selector lever
Function
The main motor is actuated and the drive pinion gears induce the threaded spindle to rotate. The slider moves into the requested position and the range
selector lever assumes the given specified position.
The actual position is recorded by the angle sensor and sent via CAN-C to the fully integrated transmission control (VGS) control unit.