ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
Constant Velocity Joint Boot: Service and Repair
Front Axle
AR33.30-P-0660-01GZ Detaching and attaching rubber boots at joint Front axle shaft
Front Axle Shaft
Component Identification
Removal:
1
Remove large hose clamp (shown with tensioning lug) (5, 9) and small hose clamp (7, 11) using side cutting pliers.
2
Pull off rubber boot.
Component Identification
Installation
3
Scrape grease off inside of rubber boot and pack into joint; replace grease if necessary. Observe filling quantity.
4
Push new rubber boot into correct position.