R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
^
Temperature and electromagnetic compatibility (EMC) properties have been optimized
Playing audio CDs
Playing audio CDs is possible via the single-slot disk drive behind the movable color display on the COMAND operating, display and controller unit and
a CD changer (with code (819) 6-disk CD changer). The CD changer is connected to the COMAND operating, display and controller unit via MOST.
Audio signal control
The COMAND operating, display and controller unit manages the audio sources, such as CD changer and amplifier for sound system (with code (810)
Sound system). The audio sources can be controlled via MOST.
An external analog audio source can be connected to the COMAND operating, display and controller unit via the AUX jack in the glove box. Data
exchange via a discrete line.
Audio output in rear (with code (519) Rear audio system)
It is possible to output audio signals in the rear using headphone connections on the HBF control unit. For this purpose, the audio signals are transferred
by the COMAND, operating, display and controller unit to the rear audio control unit over direct wiring. Here, the signals are amplified and sent to the
HBF control unit for output via headphones.
Making phone calls
The cell phone (A34/6) is inserted into the UPCI [UHI] (Universal Portable CTEL Interface) cell phone holder (A34/15) and is thereby connected to the
Universal Portable CTEL Interface (UPCI [UHI]) control unit. The telephone feature is included in the UPCI (Universal portable CTEL Interface)
control unit. The user can operate the system with the COMAND, operating, display and controller unit. The Universal Portable CTEL Interface (UPCI
[UHI]) control unit is connected to the COMAND operating, display and controller unit via MOST.
Use of DVD drive
The DVD drive of the navigation module on vehicles with code (530) COMAND APS USA (with navigation system) is not suitable for playing video
media (DVD Video, CD video). The drive is only used for reading in the navigation DVD.
Navigation
All MOST components (navigation processor and audio gateway) known from other versions and required for navigation are present in the COMAND,
operating, display and controller unit.
Emergency call
An emergency call is accomplished using the emergency call system control unit. In the event of an emergency call, the audio outputs and UPCI
(Universal portable CTEL Interface) control unit, are muted.