mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 18332 > < Procedures|Page 18330
Page 14
background image

Installation location: Right rear door rocker panel

35

Fasten black, 2-pin coupling (4) from wiring harness for illuminated door sills (2) as shown using two felt strips (arrows) (not required for door
sill, 2-fold).

The black, 2-pin coupling (4) must be positioned as shown at the right of the metal clamp (15). The wiring harness for illuminated door sills (2)
must be fastened as shown.

Installation location: Right rear door rocker panel

36

Fasten wiring harness for illuminated door sills (2) as shown using three felt strips (arrows).

The wiring harness for illuminated door sills (2) must be fastened as shown.

Installation location: Right rear wheel well

37

Route wiring harness for illuminated door sills (2) along the vehicle's wiring harness into the right luggage compartment and fasten in place using
cable ties.

Procedures|Page 18332 > < Procedures|Page 18330