R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
Installation location: Left rear door rocker panel
26
Fasten wiring harness for illuminated door sills (2) as shown using three felt strips (arrows).
The wiring harness for illuminated door sills (2) must be fastened as shown.
27
Route wiring harness for illuminated door sills (2) along vehicle's lines in left rear into the spare tire well and fasten in place using cable ties and
felt strips (arrows).
Installation location: Right B-pillar
28
Attach double sided adhesive tape to rear of right front inverter (8) and right rear inverter (9).
29
Glue right front inverter (8) for the right front illuminated door sill as shown onto the right B-pillar.
The right front inverter (8) must lie on the floor covering (arrow).
30
Glue right rear inverter (9) for the right rear illuminated door sill as shown onto the right B-pillar.
The lower right corner of the right rear inverter (9) must lie on the edge of the panel (arrow).