R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
/v6-3.5l_(272.967)/Page-3762022.png)
Installation location: Right B-pillar
31
Fasten the inverter additionally with felt tape to the right B-pillar (arrow "A").
32
Connect black, 8-pin coupling (5) from wiring harness for illuminated door sills (2) to right front inverter (8).
The black, 8-pin coupling (5), which is at the end of the wiring harness for illuminated door sills (2) must be connected.
33
Connect second black, 8-pin coupling (5) from wiring harness for illuminated door sills (2) to right rear inverter (9).
34
Attach wiring harness for illuminated door sills (2) using cable ties to vehicle's wiring harness at right B-pillar (arrow "B").
35
Route branch-off line from wiring harness for illuminated door sills (2) under the floor covering to the right front rocker panel.
The branch-off line is marked "right".
