mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Brakes - Front/Rear Brakes Squeal When Braking|Page 11660 > < Brakes - Front/Rear Brakes Squeal When Braking
Page 2
background image

^

If the batch designation is in the old format (Figure 2) and the number YYY after the dash is lower than 191, the brake pads should be replaced
in case of a complaint.

^

If the batch designation is in the new format (Figure 3) or if the old format number YYY after the dash is greater than or equal to 191, the 
brake pads do not need to be replaced since they are the latest version.

4.

Check and see if the brake pads can be easily moved. Clean the brake pad guides if necessary.

5.

Apply brake pad paste to the brake pad guides in the brake caliper as well as guide elements of the brake pads ("T-heads").

6.

If new pads were not installed and the problem still persists, replace the brake pads. Refer to EPCnet by VIN for the latest applicable part number.
Ensure to follow the above instructions (step 4) for proper location for application of brake past. 

Note:

Refer to the following WIS documents for instructions on replacing the brake pads - AR42.10-P-0160GZ (164) or AR42.10-P-0160RT (251).

Rear Brakes

1.

Reproduce squealing noises when braking and ensure that the squealing noise is coming from the rear wheel brake.

2.

For X164 vehicles built before September 2007, replace the rear brake pads with revised parts (part no. 164 420 19 20). Reference WIS document
AR42.10-P-0160GZ. For all other models and X164 with build dates after September 2007 proceed to step 3.

3.

Check and see if the brake pads can be easily moved. Clean the brake pad guides if necessary.

4.

Apply brake pad paste to the brake pad guides in the brake caliper as well as guide elements of the brake pads ("T-heads").

5.

If new pads were not installed and the problem still persists, replace the current brake pads and repeat step 3 for instructions on application of
brake past on the brake pads. Refer to EPCnet by VIN for the latest applicable part number.

Note:

Refer to the following WIS documents for instructions on replacing the brake pads - AR42.10-P-0160GZ (164) or AR42.10-P-0160RT (251).

Parts Information

Brakes - Front/Rear Brakes Squeal When Braking|Page 11660 > < Brakes - Front/Rear Brakes Squeal When Braking