R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
/v6-3.5l_(272.967)/Page-1028002.png)
Crankshaft bearing cap
3
Tighten the screws:
^
Tighten bolt 1 (M10) to stage 1.
^
Tighten bolt 2 (M10) to stage 1.
^
Tighten bolt 3 (M8) to stage 1.
^
Tighten bolt 4 (M8) to stage 1.
^
Tighten side bolt 5 (final tightening).
^
Tighten side bolt 6 (final tightening).
^
Tighten bolt 1 (M10) to stage 2.
^
Tighten bolt 2 (M10) to stage 2.
^
Tighten bolt 3 (M8) with the stage 2 tightening angle (final tightening).
^
Tighten bolt 4 (M8) with the stage 2 tightening angle (final tightening).
^
Tighten bolt 1 (M10) with the stage 3 tightening angle (final tightening).
^
Tighten bolt 2 (M10) with the stage 3 tightening angle (final tightening).
