R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
Test specifications for crankshaft bearing clearance
Special Tools
Component Identification
Only the one washer disc thickness is used.
1
Install dial indicator (2) with dial indicator holder (1)
2
Using a suitable tool, press the crankshaft axially on one side up to the attachment and hold it.
3
Set scale of dial gage (2) to zero.
4
Using a suitable tool, press the crankshaft axially on the other side up to the attachment and hold it.
5
Read off measurement value at dial indicator (2).
The measured value corresponds to the axial play of the crankshaft.
AR03.20-P-4351-02VA Tightening Procedure For Crankshaft Bearing Caps
AR03.20-P-4351-02VA Tightening procedure for crankshaft bearing caps