R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
/v6-3.5l_(272.967)/Page-1146015.png)
Application of sealant to oil pan top section
The lines (A) identify application of the sealant.
The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm
(± 0.5 mm).
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealing compound may be used.
AH01.45-P-0001-01VB Notes on Application of Sealant to Oil Pan
AH01.45-P-0001-01VB Notes on application of sealant to oil pan
Modification notes
Oil pan with rear sump
Oil pan with rear sump
The lines (A) identify the sealant beads.
The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm
(± 0.5 mm).
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealing compound may be used.
