R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
Technical Service Bulletin # T-54_30-136D
Date: 060420
Instruments - SCN Coding for Components R & R
Date: April 2005
Order No.: T-B-54.30/136d
Supersedes: T-B-54.30/136c
Group: 54
Revision:
Process and Illustrations Updated
SUBJECT:
Model 164.175/186
Model 251.165/175
Instrument Cluster SCN Coding for Component Replacement or Dealer Installed
Accessories:
A.
Introduction
B.
Process Overview
C.
Determine Vehicle Data for SCN Coding
D.
Generate SCN Codes
I. Print Out Method
II. CD-Burn Method
E.
Perform SCN Coding
I. Print Out Method
II. CD-Burn Method
NOTE:
The following allowable labor operations should be used when submitting a warranty claim for this repair.
In Case of Warranty
A. Introduction
With the launch of Model 164 and 251 SCN Coding is required in order to replace the instrument cluster or to install certain accessories at the Dealer
(i.e. Navigation, CTEL). This bulletin provides instructions on performing the SCN Coding for the instrument cluster. It is designed for ease of use and
is similar to the SCN Coding instructions of other control units.
Because of the length of the Coding String, this bulletin also includes instructions on transferring the SCN Code to the vehicle via a new method. This
new method involves burning the SCN Code onto a CD-R, and then inserting the CD-R into your STAR Diagnosis System (SDS). The SCN Code would
then be transferred into the vehicle automatically. However, you will still be able to enter the SCN Code manually via the keyboard should you choose
to.
NOTE: