R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
1.
If the CD is being read properly, you will see the following screen (Figure 14). Continue to carry out Coding by pressing "F3". Proceed to step 3.
2.
If the CD is NOT being read properly, you will see the following screen (Figure 15). Ensure that the CD is in the SDS, and press "F3" to retry the
procedure (Figure 15).
NOTE:
If the CD-Burn method is not successful, you are alternatively able to press "F4" to return to the main screen and follow the steps on
performing the SCN Coding via print out method.