mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Transmission and Drivetrain > < Engine Controls - MIL ON/DTC P1089 Stored
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Engine Hesitation/Stalling on Start-Up

Date: November 29, 2005

Order No.: T-B-07.00/56

Supersedes:

Group: 07

SUBJECT:
Model 164.186 

Model 251.165

Engine Control Unit Software Update

Star Diagnosis 11/05 release contains a software update (software level after flash should be 0024467440) for the engine control unit for the following
condition on the above model vehicles.

^

Engine hesitation or stalling when transmission is shifted into a gear immediately after engine start, during high ambient temperature with AC
operating at maximum capacity (No DTC stored in ECU)

Note

After the software flash, perform SCN coding. Refer to STAR TekInfo Document S-B-07.61/38g dated October 19, 2005 for procedure.

Transmission and Drivetrain > < Engine Controls - MIL ON/DTC P1089 Stored