R 350 4MATIC (251.165) V6-3.5L (272.967) (2006)
Suspension Hose/Line: Service and Repair
AR32.22-P-2001-02RT Repairing AIRmatic pressure line connection
Special Tools
Repair Materials
Component Identification
In the event of damage to the pressure line connections (1a) and pressure lines (4) a pressure line connector (3) or repair screwed connection (1) can
be attached.
The lines should be replaced completely if pressure lines are damaged at the front components.
A pressure line connector (3) should be used if pressure lines are damaged at the rear components (of the air suspension).
1
Unscrew the pressure line connection (1a) from the component in question (e.g. air suspension strut) and cut off pressure line (4) to a suitable
length using a knife.
Special care must be taken to ensure that the cuts are exactly at right angles to the lines.