mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.85-P-0003GZJ Cockpit Management and Data System (COMAND), Function|Page 12985 > < GF82.85-P-0003GZJ Cockpit Management and Data System (COMAND), Function|Page 12983
Page 26
background image

DVD drive

The DVD drive can read media with a storage capacity of up to 4.7 GB. A DVD can be loaded or ejected at any given time. The DVD disk drive
supports CD audio. In addition to playing audio media, this DVD disk drive can also be used for accessing navigation data. The DVD contains e.g. the
map data which are essential for map navigation.

Navigation processor

The navigation functions run in the COMAND operating, display and controller unit. For this purpose, a GPS receiver and a vibration gyro are integrated
into the device in addition to the DVD disk drive.

GPS receiver

^

Receiver unit for receiving GPS satellites (degrees longitude and latitude as well as UTC time and date)

^

Position fixing, e.g. through the reception of at least 3 satellites, the receiver can evaluate and track up to 12 satellites

Gyro sensor

The turn rate sensor is a piezo-electric vibration gyro. It is used to detect changes in direction (e.g. when cornering). The values are incorporated into the
vector calculation during interlinked satellite navigation.

Diagnosis

Diagnosis takes place from the central gateway control unit (N93) via the Control Area Network bus class D (diagnosis) (CAN-D) and to the COMAND
operating, display and controller unit. The COMAND operating, display and controller unit forms the interface (gateway) to the connected MOST
subscribers.

Other control units in the MOST ring can only be addressed and diagnosed if they are entered into the specified configuration (MOST variant coding).

GF82.85-P-3134RTU COMAND Operating, Display and Controller Unit, Component Description

GF82.85-P-3134RTU COMAND Operating, Display And Controller Unit, Component Description

- with CODE (530) COMAND APS USA (with navigation system)
- with CODE (494) USA version
- with CODE (528) HIGH Class USA

Component Identification

Location

The COMAND operating, display and controller unit is installed in the center console.
2 versions are available:

^

Vehicles with code (528) HIGH Class USA

^

Vehicles with code (530) COMAND APS USA (with navigation system)

The two versions differ in terms of the DVD drive and navigation module which can be integrated into the basic version as special equipment or dealer
option.

Task

The following system components integrated into the unit are controlled:

^

Radio tuner (AM/FM with weatherband information channel (WB))

^

Basic audio amplifier

GF82.85-P-0003GZJ Cockpit Management and Data System (COMAND), Function|Page 12985 > < GF82.85-P-0003GZJ Cockpit Management and Data System (COMAND), Function|Page 12983