R 63 AMG (251.177) V8-6.3L (156.980) (2007)
Brake Pad Wear Sensor: Service and Repair
AH42.10-P-0003-01RT Note on installing contact sensor for brake lining wear indicator
Component Identification
^
When replacing the brake pads the left front brake pad contact sensor (S10/1), the right front brake pad contact sensor (S10/2) and right rear brake
pad contact sensor (S10/4) must also be replaced.
^
The left front brake pad contact sensor (S10/1), the right front brake pad contact sensor (S10/2) and right rear brake pad contact sensor (S10/4)
may only be mounted on the inner brake pads.
^
The electrical feed line of the contact sensors must only be routed as shown in the picture.
^
Check the correct latching of the connector for the left front brake pad contact sensor (S10/1x1), right front connector for the right front brake pad
contact sensor (S10/2x1) and connector for the right rear brake pad contact sensor (S10/4x1).
Ingressing moisture can lead to the lighting up of the warning lamp in the instrument cluster.