R 63 AMG (251.177) V8-6.3L (156.980) (2007)
Parking Lamp: Description and Operation
GF82.10-P-3060RT Standing/Parking Lights Actuation, Function
Component Identification
General standing lights/parking lights actuation function sequence
The standing/parking lights actuation is comprised of several subfunctions. These are:
^
Standing lamp actuation
^
Parking lamp actuation
Standing lamp actuation
Function requirements:
^
Rotary light switch in position "Standing lamps"
Standing lamp actuation function sequence
The position of the rotary light switch is read in over LIN by the upper control panel control unit, placed on CAN-B, and received by the front SAM
control unit.
The front SAM control unit forwards the switch-on request via CAN-B to the rear SAM control unit.
Depending on the equipment fitted, the front SAM control unit actuates the following components:
^
Standing and parking lamp
^
Front side-marker lamp
Depending on the equipment fitted, the rear SAM control unit actuates the following components:
^
Brake lights, taillights, parking lights and side-marker lamp (pulsed at P = 5 W)
^
License plate lamp, rear-end door