R 63 AMG (251.177) V8-6.3L (156.980) (2007)
/v8-6.3l_(156.980)/Page-1781002.png)
Component Identification
Press in wheel bearing
3
Position wheel bearing (9n), wheel carrier (5) and drift (01) on the workshop press.
Observe correct installation position. The points or the line (arrow) on the wheel bearing (9n) must point towards the wheel carrier (5).
Use a suitable, horizontal base for supporting during the pressing operation.
4
Press in wheel bearing (9n) up to the contact surface in the wheel carrier (5) by operating the workshop press.
The correct seat of the wheel bearing (9n) is achieved when the pressure on the workshop press display rises continuously.
