S 320 LWB (140.033) L6-3.2L (104.994) (1995)
25. Insert filter set (41), spring (43), and plastic sleeve (60), compress slightly and install new self-locking nut (61). Fit on end cover (45) screw on
breather cap (47).
26. After installing power steering pump check that power steering pump operates properly and is free of leaks. If necessary, connect pressure gauge
and test delivery pressure. Fill or bleed system.
Procedure Index
Procedure Index
NOTE:
For application identification refer to "Steering : Power Steering Pump : Service and Repair : Overhaul Procedures : Application and ID" See:
Overhaul Procedures/Application and ID
TANP - Models 62,162