S 320 LWB (140.033) L6-3.2L (104.994) (1995)
Using drift punch tool No. 140 589 10 15 00, or equivalent drive new seal into place
Replace axle breather and tighten to: 30 Nm
Tighten the following components as noted:
Self-locking nut, rear extension carrier to rear axle carrier: 100 Nm
Bolt, rear extension carrier to rear axle center assembly
Colored yellow: 80 Nm
Colored silver or blue: 70 Nm
Self-locking bolt, rear axle shaft to connecting flange
10 mm bolt: 70 Nm
12 mm bolt: 100 Nm
NOTE:
Thread and bolt head support lubricated
Collared bolts, end cover to rear axle center assembly: 50 Nm
Fill rear axle center assembly with 1.2 liters of suitable differential fluid