S 320 LWB (140.033) L6-3.2L (104.994) (1995)
Special Tools
Repair Materials
1. Remove cartridge from 1-component repair kit and heat in cartridge preheater.
Cartridge heater.
Heating time is approx. 60 minutes.
2. Screw on application nozzle onto cartridge.
3. Insert cartridge into cartridge gun.
Cartridge gun.
The adhesive material can be easily pressed out using a commercially available electric (battery-powered) or pneumatic cartridge gun with piston
rod. Use adapter to completely press out cartridge. Insert adapter between cartridge piston and plate on cartridge gun push rod.
AR67.10-P-1501-01P Prepare Body Flange For Installation Of Window
AR67.10-P-1501-01P Prepare Body Flange For Installation Of Window
Repair Materials
Component Identification
The bonding area (2) on the body flange (1) must be absolutely free of dust and grease. Apply primer filler only on body flange (1) in entire bonding area
(2) when repairing damage to prevent adhesion problems when installing window. The primer stick can be used if damage is <10 %, if damage is >10 %
coat body flange (1) with 2- component primer filler.