S 320 LWB (140.033) L6-3.2L (104.994) (1995)
Torque the mounting screws (Figure 2) to no more than 1.5 Nm. In addition, a "paper thick" gap (e, Figure 1) must be maintained between the mounting
sleeves (d) and the glass (b).
Parts Information:
Part Name
Part Number
Rubber washers (2 mm)
000 987 38 41
Plastic washers (2 mm)
126 990 09 40
When replacing windshield, (SMS Body assembly jobs 1, Model 140, Job No. 67-100), be sure to use nozzle included in the windshield installation kit
as this will help ensure the adhesive bead thickness is correct. This, in turn, will help avoid positioning the glass in too high a position relative to the trim
piece.
In Case of Warranty:
Damage Code
Description
6700107
Windshield cracks caused by lower trim piece.