S 320 SWB (140.032) L6-3.2L (104.994) (1994)
Rear Door Latch: Service and Repair
Preliminary work:
Door liner removed.
Exterior door handle on rear door removed.
Vapor seal on interior door panel
detach and remove.
Crank window
close.
Screw (2 pieces) for lock cover (1)
screw out (WAF8).
Lock cover (1)
remove.
Linkage for interior door actuation (2) and central locking linkage (3) on door lock (4)
remove or unhook.
Screws (arrows) on door lock (4)
screw out. Nm: 8. When installing first tighten the front screw.
Door lock (4)
remove through installation opening in door inner panel.
Reinstall
in opposite order.
Removal, Installation
1
Pull off vapor seal on interior door panel and close crank window.