Interior - Center Console Cover Removal & Installation Procedure
Technical Service Bulletin # 68_08
Date: 970501
Interior - Center Console Cover Removal & Installation
REF. NO.: MBNA 68/08
TO: ALL MERCEDES-BENZ PASSENGER CAR DEALERS
DATE: May 1997
SUBJECT:
MODEL 140 WITH ONE-PIECE CENTER CONSOLE COVER
MODIFIED REMOVAL AND INSTALLATION PROCEDURE
Included in this Service Information is the Work Instruction no. 365 which describes the removal and installation of the one-piece center console cover
in model 140 vehicles.
Note:
Any center console damaged due to improper removal/installation cannot be charged to MBNA on a warranty claim. Consoles inspected by MBNA
are subject to claim debits.
Work Instructions
Group: 68
Number: 365
Date: May 1997
SUBJECT:
MODEL 140 WITH ONE-PIECE CENTER CONSOLE COVER
MODIFIED REMOVAL AND INSTALLATION PROCEDURE
1.
Disconnect and cover negative battery terminal.
2.
Remove radio and A/C push-button control module from center console using Special Tool no. 929 589 01 05 00 (1, Figure 1).